• Summary

    Mil1394 PMC Card

    DapTechnology offers two flavors of AS5643 triple-bus standard OHCI Adapters, i.e. a PCI version and a PMC version. They address the growing need for multi-bus and transformer-coupled bus interface solutions, primarily in mission-critical aerospace and defense applications requiring longer distances according to SAE AS5643/1.

    Both adapter cards, which support standard 64 bit/66 MHz PCI interfaces, are fully OHCI 1.1 compliant and feature 3 independent IEEE-1394 buses. The products accommodate off-the-shelf IEEE-1394 OHCI drivers from WindowsTM & Linux-based operating systems. No driver modification/installation is required.

    For a more optimized API and/or operating systems without built-in support we recommend to use DapTechnology's FireStack. FireStack currently supports WindowsTM, Linux, VxWorks, IRIX and QNX. Please contact DapTechnology directly for operating systems not currently supported.

    Key features

    • IEEE 1394b-2002 compliant
    • Supports S100-S400 data transfer rates *
    • PCI 2.1 compliant
    • 3 independent nodes with a total of 6 IEEE-1394 ports.
    • Active transformer coupled
    • Beta connectors
    • Port mode programming via dip switches
    • Supported out-of-the-box by WindowsTM and Linux
    • Supported by FireStack on WindowsTM, Linux, VxWorks, IRIX and QNX

    *) Depending on exact model

    Block Diagram

  • Specification

    Mil1394 PMC Specification

    Dimensions: PMC mezzanine, 15mm x 74mm x 154 mm  
    Weight: 100 g  
    Power Requirements: 12V, 7 Watt maximum  
    Regulatory compliance: FCC Class A  
    Connections:

    64bit PMC connector

    Off-board connector with fan-out cable for 9 bus connections

     
    Indicators -  
    Switches: 3 dip switches for PHY port mode programming  
    Part Number: PMC341BT(1)  
    Optional Configurations: -  
  • Media

    Mil1394 PMC media files

    Product Image(s)

     

     

  • Documents

    Mil1394 PMC documentation

  • Software

    Mil1394 PMC software

    Standard OHCI Link Layers and FireStack

    FireStack® is DapTechnology’s homegrown 1394 software stack. Initially developed in conjunction with the company’s 1394 Link Layer Controller FireLink®, the product was architectured from ground up in order to support the advanced features of the FireLink® IP (Basic and Extended) solution. Since then additional mechanisms have been added to FireStack® to enable support for generic OHCI compliant Link layers.

    FireStack® is an alternative to using general purpose SW implementations with standard OHCI I/O interfaces as it offers a more deterministic approach. Modern plug & play solutions are not always recommended for use in enclosed systems since they typically add undesired bus traffic, latencies, etc... The ability to customize FireStack® modules allows focusing on the task requirements without unwanted system, traffic and data overhead.

  • Accessories

    Mil1394 PMC accessories

    The following accessories are available for this product:

    Mil1394 SCSI2 Spider Cable

    For Product(s): PMC cards wtih SCSI2 connector: FireTrac, Mil394-PMC
    Documents: -
    Cable Type: Gore Quadrax
    Webshop:  available 

    Part number:
    PMC3CH3FNT

    Termination 1:
    1x SCSCI2 connector,
    68-pin

    Termination 2:
    9x unterminated cable

    Length:
    3 feet

    PMC3CH3FNT-IS

    as above

    9x unterminated cable
    1x IRIG and 3x SYNC

    3 feet

    The harnesses above are also availbale in 5ft, 10ft, 15ft, 20ft and 50ft variants.

    Mil1394 SCSI2 Spider Cable with 19" panel

    For Product(s): PMC cards wtih SCSI2 connector: FireTrac, Mil394-PMC
    Documents: -
    Cable Type: Gore Quadrax
    Webshop: available  

    Part number:
    PMC3CH5F19FP

    Termination 1:
    1x SCSCI2 connector,
    68-pin

    Termination 2:
    9x 1394 Bilingual (female),
    9-pin

    Length:
    5 feet

    PMC3CH5F19FP-IS

    as above

    9x 1394 Bilingual (female),
    9-pin
    1x IRIG and 3xSYNC

    5 feet

    PCIe - single lane Carrier Card

    for Product(s): all PMC Mezzanine cards
    Documents: Datasheet

    Partnumber:
    CC_PCIeG1x1_to_PMC

    Host Interface:
    PCI Express 1.1, single lane

    Form Factor:
    standard height, half length

    other:
    -

     

    PCIe - four lane Carrier Card

    for Product(s): all PMC Mezzanine cards
    Documents: Datasheet

    Partnumber:
    CC_PCIeG1x4_TO_PMC

    Host Interface:
    PCI Express 1.1, 4 lane

    Form Factor:
    standard height, half length

    other:
    -

     

    PMC Carrier Card
    4-Lane PXIe

    for Product(s): all PMC Mezzanine cards
    Documents: Datasheet

    Partnumber:
    CC_PXIeG1x4_TO_PMC

    Host Interface:
    PXI Express 1.2, 4 lane

    Form Factor:
    standard height, half length

    other:
    -

     

  • Sales

    Mil1394 PMC sales info

    Package Contents

    Please contact DapTechnology or DapUSA directly by sending an email to sales(at)daptechnology.com for additional information about pricing and availability!